Forward facing propellers have proved to be superior in terms of performance, drivability and not least – fuel consumption. By working in undisturbed water the propulsion efficiency is far greater than on conventional inboard systems.
The fact that the propeller thrust is aimed horizontally means that all power drives the boat forward. Volvo Penta IPS also enables the use of flat-surface hulls, which means the boat can be designed for minimum resistance.
30% less fuel – 40% longer range
When it comes to fuel economy, the benefits of Volvo Penta IPS are obvious – an impressive 30% possible reduction of fuel consumption at service speed compared to inboard shafts. That translates into over 40% longer operating range, and of course a huge drop in exhaust emissions.
It seems like an impossible combination, but while decreasing fuel consumption, performance is also greatly improved. In a match-up against inboard shafts of the same power, the differences are obvious. The boat equipped with Volvo Penta IPS accelerates much faster, and has a higher top speed.
Forward facing
Forward facing
Minimal vibrations and fumes
The vibration levels are kept low, partly because of the twin counter-rotating propellers that run free of cavitation well under the hull. Furthermore, the installation makes for effective suspension, preventing vibrations from spreading through the system.
Since the exhausts are emitted through the rear of the propulsion unit into the prop wash, they are carried well behind the boat.
The twin counter-rotating propellers face forward and work in undisturbed water. The propeller thrust is parallel with the hull. All power drives the boat forward.
All exhaust fumes are emitted through the pods, into the prop wash and carried well behind the boat.
The propellers are positioned well under the hull to eliminate the risk of air intrusion and cavitation, even in sharp turns and under full acceleration.
Forward-facing propellers, with no exhausts through the hub, minimize the hub diameter. This gives a proportionally much larger active blade area, and better grip in the water.
The vibration levels are kept low, partly because of the twin counter-rotating propellers that run free of cavitation well under the hull. Furthermore, the installation makes for effective suspension, preventing vibrations from spreading through the system.
Since the exhausts are emitted through the rear of the propulsion unit into the prop wash, they are carried well behind the boat.
The twin counter-rotating propellers face forward and work in undisturbed water. The propeller thrust is parallel with the hull. All power drives the boat forward.
All exhaust fumes are emitted through the pods, into the prop wash and carried well behind the boat.
The propellers are positioned well under the hull to eliminate the risk of air intrusion and cavitation, even in sharp turns and under full acceleration.
Forward-facing propellers, with no exhausts through the hub, minimize the hub diameter. This gives a proportionally much larger active blade area, and better grip in the water.